The iron water ladle cover lifting device is a special equipment developed for the heat preservation of the iron water ladle. Each iron ladle tank truck is with a set, which moves with the vehicle. Before the iron water ladle is ready to pour iron, the cover is lifted. After pouring iron, the cover is covered to the iron water ladle insulated. Before transporting to the steel plant, the cover is lifted, and after use, the cover is covered in time to achieve the purpose of preservation, energy saving, rain prevention and environmental protection.

        1.Flexible equipment installation, simple and reliable structure, one vehicle with a set of matching equipment, convenient operation

        2.Strong thermal insulation performance, effectively heat loss by more than 60%

        3. The opening speed of the cover can be adjusted.

          The alloy roasting device is a special alloy heating device behind the furnace, which is placed above the alloy feeding rotating pipe on the converter operation platform and a special equipment for heating a variety of alloy furnace charges such as silicon iron and manganese iron. The core furnace body of the equipment is cast from wear-resistant and hightemperature resistant alloy steel. The upper, middle and lower parts of the furnace body are equipped with multiple sets of burners, which are symmetrically distributed around the furnace body, so the high-temperature airflow heats the alloy along the tangent in the furnace body, which can effectively prevent the sintering of materials. At the same time, the thermal gas the combustion chamber can be preheated for the materials above during the process of rising, so as to achieve the purpose of energy saving.

         1.Simple equipment maintenance and operation, long service life           

         2.Uniform preheating temperature of alloy materials, avoiding sintering 

         3.Short preheating time, perfectly matched with steelmaking process

         The electric heating water nozzle preheating furnace is a dedicated device for water nozzle heating. The bottom of the equipment is assembled by section steel as bottom frame, surrounded by steel plates and rib plates as the outer contour skeleton, and the interior is filled with rock wool as the insulation material. The equipment is usually placed on the platform, supporting the continuous baking of 6-20 water nozzles. The equipment is supplied in one piece, easy to install, and can be used immediately. The can be adjusted within the range of 800-1200℃. Pure electricity is used as the only energy source, avoiding the risk of direct emission of smoke carbon monoxide leakage, and effectively ensuring the safety of personnel.

         1. Simple device structure, one-piece supply and installation is convenient and quick, low maintenance cost later. 

         2. Fast heating speed, low energy consumption compared with traditional gas preheating to reduce 70% energy consumption. 

         3. Safe and reliable operation, use as you go, no smoke and carbon monoxide leakage risk